Tag Archives: accessory

Review: WD PiDrive, a 314GB hard drive for the Raspberry Pi

I like solid-state storage, but there’s a time when you want the storage capacity that only a hard drive can bring — at least until SSDs become much, much cheaper. Of course, SD cards are pretty cheap to buy and to support in hardware which is why the format was chosen for the Raspberry Pi in the first place. At high capacities, the price:gigabyte ratio isn’t as attractive as that of a hard drive, but you get a single point of access for all your computer storage just as you do with any modern laptop or desktop.

Continue reading

Review: the PiFace Real-Time Clock

Unhook a Raspberry Pi from the mains and it forgets the time and date. It’ll only get them back again if you re-connect it to the Internet or enter the data manually. As a Pi user who doesn’t keep his kit connected – I usually wire and power it up when I need it – and doesn’t always bother with the Ethernet cable when he does, I’ve been after a decent real-time clock (RTC) add-on for quite a while. An RTC allows your Pi to keep time, even when the Pi’s power is cut.

Continue reading

Review: Pimoroni/Cyntech Pibrella

There is no shortage of clip-on boards designed for the Raspberry Pi, almost all designed to make the tiny computer’s GPIO pins more accessible in order to ease the connection of devices to it, particularly ones that operate at voltages that are not Pi friendly.

Continue reading